Table of Contents
- 1. Mercedes-AMG High Performance Powertrains (Mercedes HPP)
- Match your evidence to the department
- 2. Scuderia Ferrari / Ferrari Power Unit
- Build a technically specific application
- 3. Audi Formula Racing GmbH
- A strong route for hybrid-system candidates
- 4. Red Bull Powertrains / Red Bull Ford Powertrains
- Show how you protect build quality
- 5. Honda Racing Corporation (HRC)
- Separate technical fit from geographical fit
- 6. GM Performance Power Units (GM PPU)
- Consider the work needed before racing
- 7. Honda Racing Corporation USA (HRC US)
- Evaluate the experience you would gain
- Engine Manufacturers Compared by Base, Supply Model, Best-Fit Candidates, and Application Route
- Choosing Your Route Into Power-Unit Work
- Turn your shortlist into targeted applications

Do not index
Do not index
Canonical URL
You're a graduate mechanical engineer with combustion experience, and you've started comparing engine manufacturers. The immediate question isn't which badge looks best on your CV. It's where the engineering happens, which organisation employs the people doing it, and whether your experience fits the vacancies available.
Where F1 power units are built and how to get hired depends on location, supply model, and discipline. A manufacturer supporting customer teams offers different work from a racing organisation recruiting for domestic programmes. A factory test role also requires different evidence from a travelling race-support position.
Trackside Careers is an independent career advice and job-discovery platform, not an official Formula 1 property, and isn't affiliated with Formula 1, the FIA, or any team. Employers' own adverts remain the authoritative version of each role.
The manufacturers below are compared by hiring route rather than prestige. Honda's works operation and U.S. racing business appear separately because they offer distinct routes, not because they represent separate F1 power-unit suppliers.
1. Mercedes-AMG High Performance Powertrains (Mercedes HPP)

Mercedes HPP is a direct power-unit route for candidates willing to work in Brixworth, UK. Its work spans design, manufacturing, testing, and race support for Mercedes' works team and customer teams, alongside Advanced Technologies projects beyond F1. Use the Mercedes HPP website to reach official vacancies and early-careers information.
The practical advantage is breadth. You can target combustion development, electrical engineering, machining, quality, procurement, or technical support without treating “engine designer” as the only relevant job title.
Match your evidence to the department
For a test-engineering application, show how you specified instrumentation, assessed measurement uncertainty, and investigated unexpected results. For manufacturing, explain drawing interpretation, inspection, process control, and how you handled a non-conforming component.
- Best fit: Automotive powertrain engineers, electrical specialists, precision-manufacturing candidates, and graduates with relevant project evidence.
- Main advantage: Customer-team supply offers exposure to supporting different installation and operational requirements.
- Main limitation: Specialist work is concentrated in the UK, and the careers pages don't provide a general salary scale.
Mercedes reported exceeding 50% thermal efficiency on a dynamometer, making efficiency and validation useful interview topics, not just peak power, as described in reporting on its power-unit benchmark.
Before applying, distinguish an F1 vacancy from an Advanced Technologies role. Both may suit your background, but don't assume either guarantees trackside work or an internal transfer.
2. Scuderia Ferrari / Ferrari Power Unit
Ferrari is worth considering if you want in-house power-unit work and can realistically pursue employment in Maranello, Italy. Its organisation develops power units for its own team and customer teams, with opportunities extending into electronics, software, simulation, manufacturing, quality, and race operations. Start through the Ferrari Formula 1 website, then move on to the official recruitment portal and talent community.
The important distinction is between working for Ferrari and working on its F1 power unit. A vacancy elsewhere in the business may build relevant skills, but the employer's name alone doesn't establish the programme, department, or reporting line.
Build a technically specific application
A mechanical-engineering degree is relevant, but your supporting evidence should identify the decisions you made. A combustion project becomes stronger when you explain boundary conditions, model limitations, thermal loading, and how you compared predictions with test results.
For electronics or software, show requirements, validation, fault handling, and controlled changes. Candidates moving from aerospace or defence should translate their experience into clear engineering outcomes rather than relying on sector reputation.
The trade-off is location and language. Many motorsport-specific positions are likely to require working in Italy, and some may require Italian. Check the individual advert rather than assuming every role has the same language requirement.
Ferrari's careers homepage doesn't publish a general F1 salary schedule. Establish the role's scope, contractual location, and relocation expectations before deciding whether an offer is workable.
3. Audi Formula Racing GmbH

Search by site before searching by job title at Audi. Power-unit development and manufacturing are centred in Neuburg an der Donau, Germany, while the wider F1 organisation also has operations in Hinwil and the UK. The Audi Formula Racing website provides the starting point for official company and careers information.
That geography matters. A position carrying the Audi F1 name isn't automatically a power-unit job in Neuburg, and a role elsewhere may involve a different technical function.
A strong route for hybrid-system candidates
Audi's power-unit work combines combustion engineering, energy recovery, storage, electric machines, and control electronics. Candidates from automotive electrification, robotics, industrial controls, and energy systems should assess their fit against the subsystem rather than exclude themselves for lacking motorsport experience.
The regulatory direction supports that approach: the 2026 rules increase MGU-K output from 120 kW to 350 kW and remove the MGU-H, as explained in the Formula 1 power-unit regulation guide.
- What works: A portfolio connecting hardware, control logic, thermal behaviour, and validation.
- What doesn't: Describing yourself as an electrification specialist without explaining your contribution to a tested system.
- What to verify: Employing entity, base location, required language, and whether an early-career vacancy belongs to the power-unit organisation.
A developing programme may offer opportunities to help establish engineering processes. The counterweight is uncertainty: responsibilities and vacancies can change, so assess the live advert rather than assuming a permanent hiring pattern.
4. Red Bull Powertrains / Red Bull Ford Powertrains

A precision machinist or production technician should look beyond vacancies labelled “engineering”. Red Bull Powertrains' operation in Milton Keynes, UK, includes power-unit design, manufacturing, testing, quality, production, and logistics, with Ford providing technical support to the hybrid programme. The Red Bull Racing careers portal is the official route for checking vacancies and student placements.
This makes it relevant to candidates who can turn designs into controlled, inspectable hardware. Manufacturing experience isn't a secondary route if the job requires machining, assembly, inspection, or production coordination.
Show how you protect build quality
A useful application example might explain how you identified a drawing ambiguity, contained a defective batch, or maintained component traceability through production. Describe the escalation and documentation, not just the fact that the part was eventually delivered.
For logistics candidates, connect your experience to accurate inventory, controlled dispatch, supplier coordination, and build schedules. Don't assume a factory logistics role includes travelling with the race team.
The advantage is the range of practical and technical entry points within a developing powertrain organisation. The limitation is that the main operation is UK-based, and candidates should investigate shift patterns, overtime arrangements, and performance expectations before accepting.
Ask what the role owns during a test or build deadline. A precise answer is more useful than a general promise of working in a fast-paced environment.
5. Honda Racing Corporation (HRC)

Honda's F1 works operation and its U.S. racing organisation aren't interchangeable hiring routes. HRC develops, manufactures, and operates Honda's F1 power unit for its works partnership with Aston Martin. Use the Honda F1 programme website to understand that programme before following official recruitment routes.
Honda's broader motorsport activity offers related opportunities, but applicants should establish exactly which racing programme a vacancy supports. An engine-testing role can be relevant to your long-term plans without being an F1 position.
Separate technical fit from geographical fit
Combustion, hybrid systems, engine testing, calibration, and race-support experience are relevant backgrounds to investigate. Candidates should also assess whether the role requires international coordination, travel, or relocation outside the United States.
- For test specialists: Explain safe operating procedures, instrumentation, repeatability, and how you investigated an abnormal result.
- For controls candidates: Show how you validated behaviour across operating conditions and handled faults.
- For race-support applicants: Demonstrate concise technical reporting, reliable handovers, and disciplined decisions under time pressure.
The benefit is a route into a manufacturer with both F1 and wider racing activity. The constraint is that a suitable technical role may not be available in your preferred country.
Before applying, confirm the employing organisation, contractual base, working language, and programme assignment. Don't use the Honda name as evidence that a vacancy leads directly to F1, and don't assume a U.S. application enters the works power-unit recruitment process.
6. GM Performance Power Units (GM PPU)

GM PPU deserves attention from U.S.-based candidates who want to investigate a developing power-unit organisation rather than rely entirely on overseas applications. The General Motors and TWG Motorsports partnership plans a dedicated facility near GM's Charlotte Technical Center and provides a prospective-applicant route through the GM Performance Power Units website.
Its power units are planned for Cadillac's 2029 F1 programme, rather than being an existing Cadillac race supply, according to the company's programme information. Treat that date as a planned milestone, not a guarantee of a particular vacancy or start date.
Consider the work needed before racing
Development programmes need more than senior designers. When assessing vacancies, look for opportunities in test operations, calibration, manufacturing engineering, procurement, quality, facilities, and programme coordination.
Automotive combustion and electrification experience can be relevant to the stated focus on hybrid systems, energy recovery, sustainable fuels, and efficient engines. Your application should explain what transfers directly and where you would need motorsport-specific training.
The opportunity is to contribute while teams and processes are being established. The risk is that facilities, responsibilities, and programme requirements may evolve.
Ask where you would work initially, whether a later move is expected, and what deliverables the position owns. Also distinguish GM PPU employment from broader Cadillac F1 team openings: a chassis, commercial, or team-operations vacancy isn't automatically a power-unit role.
For career switchers, favour positions that strengthen portable skills such as validation, quality systems, controls, and manufacturing discipline. That remains useful experience even if your eventual route into motorsport changes.
7. Honda Racing Corporation USA (HRC US)

For candidates who need to remain in the United States, HRC US is a professional motorsport route, not a substitute label for Honda's F1 works operation. Its work includes racing engines, chassis, performance parts, and factory support across activities beyond Formula 1. The HRC US About page provides access to company information, careers search, and contact details.
That distinction can improve your applications. Applying because you want to solve the advertised programme's problems is more convincing than presenting domestic racing as something you intend to leave immediately.
Evaluate the experience you would gain
A useful role could develop your ability to prepare hardware, support testing, diagnose faults, manage technical information, or coordinate race preparation. Those are concrete capabilities to compare against future vacancies, without assuming an automatic internal move to F1.
- Engineering candidates: Look for responsibility for design decisions, validation, data interpretation, or technical support.
- Workshop candidates: Assess assembly standards, inspection duties, preparation procedures, and fault-reporting responsibilities.
- Operations candidates: Check whether the position covers factory coordination, event support, parts movement, or travel.
The advantage is geographical accessibility for U.S.-based applicants seeking high-performance motorsport experience. The limitation is that vacancies may support domestic programmes rather than F1 power units.
Read the programme description carefully and ask about progression within that organisation. A later F1 move may still require further experience, a separate application, and relocation.
Engine Manufacturers Compared by Base, Supply Model, Best-Fit Candidates, and Application Route
Item | Primary Base | Supply Model | Best Fit For | Application Route |
Mercedes-AMG High Performance Powertrains (Mercedes HPP) | Brixworth, UK | Supplies Mercedes works team and customer teams | Candidates seeking F1 power-unit engineering, manufacturing, or race operations | Official vacancies and early-careers information |
Scuderia Ferrari / Ferrari Power Unit | Maranello, Italy | Develops power units for its own team and customer teams | Candidates interested in F1 engineering, production, technology, or business roles | Ferrari careers portal and talent community |
Audi Formula Racing GmbH | Neuburg an der Donau, Germany; operations also in Hinwil and the UK | Develops and manufactures Audi's F1 power unit | Candidates interested in combustion, hybrid systems, electronics, or transmission | Official careers pages, including graduate and early-career routes |
Red Bull Powertrains / Red Bull Ford Powertrains | Milton Keynes, UK | Develops power units for Red Bull's F1 teams with Ford support | Engineers and candidates in manufacturing, testing, quality, or logistics | Red Bull careers portal and student placements |
Honda Racing Corporation (HRC) | Location varies; U.S. candidates can explore HRC US | Develops and operates Honda's F1 power unit with Aston Martin; broader motorsport activities | Candidates with engine, hybrid, testing, or race-support experience | Official Honda F1 and HRC US information |
GM Performance Power Units (GM PPU) | Planned facility near Charlotte, North Carolina, US | Developing power units for Cadillac's planned 2029 F1 program | U.S.-based candidates in powertrain engineering, electrification, or manufacturing | GM PPU official website |
Honda Racing Corporation USA (HRC US) | United States | Supports racing programs beyond F1, including engines, chassis, and performance parts | U.S. candidates seeking transferable motorsport engineering or technical-support experience | Official careers search and contact information |
Choosing Your Route Into Power-Unit Work
The best shortlist starts with your strongest evidence and your realistic location options. Combustion candidates should investigate design, calibration, thermofluids, and test roles; hybrid-electronics candidates should assess electric machines, power electronics, controls, and battery systems. Manufacturing applicants should focus on machining, assembly, inspection, quality, and production engineering rather than searching only for graduate engineer vacancies.
Supply models matter too. A manufacturer serving customer teams may offer customer-interface and installation-support work, while a developing programme may need candidates who can establish processes. Neither is automatically better: choose the responsibilities you can perform and the experience you need next.
Turn your shortlist into targeted applications
Shortlist two or three manufacturers, then compare actual vacancies rather than corporate descriptions.
- Confirm the workplace: Check the contractual location, attendance requirements, work-authorisation conditions, and relocation expectations.
- Identify the programme: Establish whether the role is F1-specific, advanced engineering, or another racing category.
- Prepare relevant evidence: Select a design review, test investigation, manufacturing improvement, or operational example that matches the responsibilities.
- Verify the advert: Follow the vacancy to the employer's own careers site or recruiting system before applying.
For engineering interviews, practise explaining a failed test, a model that didn't match measurements, and a technical trade-off you defended. For workshop and operations roles, prepare examples involving traceability, handovers, safe working, and accurate delivery under pressure.
Compare software requirements closely. If an advert names a CAD, simulation, calibration, or data-analysis package, distinguish direct experience from transferable knowledge rather than claiming proficiency you can't demonstrate.
We list roles sourced from employers' own careers sites and recruiting systems, and the employer's advert remains authoritative. Where we provide an AI-written summary, it's labelled accordingly.
Finally, establish salary, working hours, travel, and progression with the recruiter. Don't infer compensation or lifestyle from the manufacturer's reputation.
Trackside Careers brings together employer-sourced opportunities across motorsport engineering, manufacturing, data, and operations. Visit Trackside Careers to find roles relevant to your power-unit skills and preferred location, then verify the requirements on the employer's original advert before applying.
Written by
